steel partitions
Homepage About Office Partitions Office partitioning products Gallery Contact page steel partitions

steel partitions Products - Double Skin Steel Partitions

Panels are constructed from 25.4 x 42 x 25.4 x 1.2mm cold rolled channels panelled both sides with 0 8mm (21g) CR4 mild steel sheet with 30mm Rockwool mineral fibre infill and are joined together using an ‘H’ section, making the installation very similar to the installation of composite part systems. Panels are available in solid, half-glazed, solid/glazed/solid or borrowed light elevation.

Double Skin Steel Partitions - click for a bigger view Double Skin Steel Partitions - click for a bigger view Double Skin Steel Partitions - click for a bigger view Double Skin Steel Partitions - click for a bigger view

steel partitions STANDARD PANEL SIZES

Height 2400, 2700, 3000mm
Width 1000mm
Dado Height 1200mm
Thickness 47mm
A range of infill and special size panels can be supplied to maintain final dimensions.

steel partitions MULLION SIZES

50 x 50 x 2.0mm - up to 2700mm
80 40 x 2.5mm - 2700mm and above
100 x 50 x 3.0mm -to suit installation
All two-way intermediate mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength. e.g. on clear access doors.

steel partitions STANDARD DOOR MODULE SIZES - STEEL OR TIMBER

Side Hung Doors height 2022mm width 900mm
Double Doors height 2022mm width 1740mm
Sliding Doors to suit customer requirements
Doors can be supplied with or without vision panels.
A full range of non standard door types, i.e. full height leaves, clear access modules or hospital type leaves are available to order.

Double Skin Steel Partitions - click for a bigger view Double Skin Steel Partitions - click for a bigger view Double Skin Steel Partitions - click for a bigger view Double Skin Steel Partitions - click for a bigger view

steel partitions GLAZING

Glass is mounted on foam strip and held in place by steel glazing beads, 6mm toughened, 6.4mm laminated and 6mm Pyroshield are supplied as standard. However other types of glass and Perspex may also be fitted as required. Double glazed panels may be supplied using 6mm toughened to outer face and 4mm toughened to the inside face, fitted into a plastic two-piece double glazing section.

steel partitions PAINT FINISH

All panels are electrostatically powder coated in the following standard colours:-
Grey 10 A 07, Grey 00 A 05, Sandstone 08 B17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.

steel partitions ACCESSORIES

A comprehensive range of accessories including drop-down and sliding hatches, louvers, vents and locking systems are available to order.

steel partitions

steel partitions Steel Partitions

_contact us for a free quotation

steel partitions

steel partitions

steel partitions

 

steel partitions steel partitions steel partitions
For further information e-mail: sales@steelpartitions.co.uk
All site content © Steel Partitions | Website built by Ambrow Limited
steel partitions homepage steel partitions site map contact steel partitions steel partitions homepage